Afro Woman Embroidery Patch: Black Woman with Peach Headwrap

Black woman with head wrap, peach color. Beautiful Black Woman.
Afro Woman, BGM

Patch is approx. 2 1/4" x 5 1/8"

MY SUGGESTED METHOD IS TO SEW THE PATCH TO YOUR GARMENT.

The Iron on Adhesive is for "PLACEMENT" only of the Patch to your Garment or item, NOT FOR A PERMANENT ADHESION.
SEW around the edges after using the Iron on for placement.

Instructions:
Preheat Your Iron
Set your iron to "Cotton" or "High Heat" (around 300°F / 150°C).
Make sure the steam function is turned off.
Position the Patch

Lay the fabric on a flat, heat-resistant surface.
Place the patch in your desired location with the adhesive side down (backing against the fabric).
Protect the Patch

Cover the patch with a thin towel or parchment paper to prevent direct contact with the iron.
Apply Heat & Pressure

Press the iron firmly onto the patch for 30–45 seconds without moving it around.
Apply steady pressure to ensure the adhesive melts into the fabric.
Flip & Repeat

Turn the fabric inside out (if possible).
Iron the back of the patch for another 30 seconds to reinforce the bond.
Cool & Check

Let the patch cool for 5 minutes before touching it.
Gently tug the edges to check if it’s secure.
If edges lift, repeat the ironing process for another 10–15 seconds.

Extra Tips:
For extra durability, sew around the patch after ironing.
Avoid washing the item for 24 hours to let the adhesive fully set.
Wash on a gentle cycle and air dry to prolong patch life.
Your embroidered patch is now securely attached and ready to display!

Iron-On Instructions for an Embroidered Patch Using a HEAT PRES

Heat Press Settings:
Temperature: 305°F – 320°F (150°C – 160°C)
Pressure: Medium to firm
Time: 15–20 seconds

Instructions:

Preheat the Heat Press
Set your heat press to 305°F – 320°F (adjust based on fabric type).
Position the Patch

Lay your fabric flat on the heat press platen.
Place the patch on the fabric with the adhesive side down.
Cover the Patch

Place a Teflon sheet or parchment paper over the patch to protect the embroidery from direct heat.

Apply Heat & Pressure:
Press and apply firm pressure for 15–20 seconds.

Cool & Check:
Carefully remove the fabric from the heat press and let it cool for 5 minutes.
Check if the patch is securely adhered.
If edges lift, repeat the press for 5–10 more seconds.

AFTER THIS PROCESS:

SEW THE PATCH TO YOUR GARMENT.

The Iron on Adhesive is for "PLACEMENT" only of the Patch to your Garment or item, NOT FOR A PERMANENT ADHESION.
SEW around the edges after using the Iron on for placement.

Your embroidered patch is now securely attached and ready to wear!

Please Contact us with any Questions.